Posts Tagged “template”

Thursday, November 24, 2022
  Fragment Rendering in Giraffe View Engine

A few months back, Carson Gross, author of the outstanding htmx library, wrote an essay entitled “Template Fragments”; if you are unfamiliar with the concept, read that first.

The goal is to allow an application to render a partial view without defining that partial view as its own template, in its own file. A common pattern in hypermedia-driven applications (and listed “con” for them) is that every little piece that may need to be rendered on its own must be broken out into its own template. This pattern eliminates the “locality of behavior” benefits; you cannot even see your entire template together in one place. Fragment rendering eliminates that requirement.

Developing with Giraffe View Engine, we can do part of this out-of-the-box, as we can control the functions we use to create the nodes that will eventually be rendered. And, while there is not a concept of a “template fragment” in Giraffe View Engine, the term “fragment” as applied to an HTML document identifies its id attribute.

Giraffe.ViewEngine.Htmx, as of v1.8.4, now supports rendering these fragments based on the id attribute. Giraffe has the RenderView module where its rendering functions are defined; opening the Giraffe.ViewEngine.Htmx namespace exposes the RenderFragment module. Its functions follow the pattern of Giraffe View Engine:

  • AsString functions return a string
  • AsBytes functions return a byte array
  • IntoStringBuilder functions render into the provided StringBuilder

Each of those three modules has htmlFromNodes if the source is a node list, and htmlFromNode if the source is a single node. (As fragment rendering has little-to-no use in the XML world, XML rendering functions are not provided.)

One final thought - while this was built with htmx applications in mind, the concept does not require htmx. If you want to render fragments with Giraffe View Engine, using this package will allow that, whether your application uses htmx (you probably should!) or not.

Categorized under , ,
Tagged , , , ,

Saturday, August 25, 2018
  A Tour of myPrayerJournal: The Front End

NOTES:

  • This is post 2 in a series; see the introduction for all of them, and the requirements for which this software was built.
  • Links that start with the text “mpj:” are links to the 1.0.0 tag (1.0 release) of myPrayerJournal, unless otherwise noted.

Vue is a front-end JavaScript framework that aims to have very little boilerplate and ceremony, while still presenting a componentized abstraction that can scale to enterprise-level if required1. Vue components can be coded using inline templates or multiple files (splitting code and template). Vue also provides Single File Components (SFCs, using the .vue extension), which allow you to put template, code, and style all in the same spot; these encapsulate the component, but allow all three parts to be expressed as if they were in separate files (rather than, for example, having an HTML snippet as a string in a JavaScript file). The Vetur plugin for Visual Studio Code provides syntax coloring support for each of the three sections of the file.

Layout

Using the default template, main.js is the entry point; it creates a Vue instance and attaches it to an element named app. This file also supports registering common components, so they do not have to be specifically imported and referenced in components that wish to use them. For myPrayerJournal, we registered our common components there (mpj:main.js). We also registered a few third-party Vue components to support a progress bar (activated during API activity) and toasts (pop-up notifications).

App.vue is also part of the default template, and is the component that main.js attaches to the app elements (mpj:App.vue). It serves as the main template for our application; if you have done much template work, you'll likely recognize the familiar pattern of header/content/footer.

This is also our first look at an SFC, so let's dig in there. The top part is the template; we used Pug (formerly Jade) for our templates. The next part is enclosed in script tags, and is the script for the page. For this component, we import one additional component (Navigation.vue) and the version from package.json, then export an object that conforms to Vue's expected component structure. Finally, styles for the component are enclosed in style tags. If the scoped attribute is present on the style tag, Vue will generate data attributes for each element, and render the declared styles as only affecting elements with that attribute. myPrayerJournal doesn't use scoped styles that much; Vue recommends classes instead, if practical, to reduce complexity in the compiled app.

Also of note in App.js is the code surrounding the use of the toast component. In the template, it's declared as toast(ref='toast'). Although we registered it in main.js and can use it anywhere, if we put it in other components, they create their own instance of it. The ref attribute causes Vue to generate a reference to that element in the component's $refs collection. This enables us to, from any component loaded by the router (which we'll discuss a bit later), access the toast instance by using this.$parent.$refs.toast, which allows us to send toasts whenever we want, and have the one instance handle showing them and fading them out. (Without this, toasts would appear on top of each other, because the independent instances have no idea what the others are currently showing.)

Routing

Just as URLs are important in a regular application, they are important in a Vue app. The Vue router is a separate component, but can be included in the new project template via the Vue CLI. In App.vue, the router-view item renders the output from the router; we wire in the router in main.js. Configuring the router (mpj:router.js) is rather straightforward:

  • Import all of the components that should appear to be a page (i.e., not modals or common components)
  • Assign each route a path and name, and specify the component
  • For URLs that contain data (a segment starting with :), ensure props: true is part of the route configuration

The scrollBehavior function, as it appears in the source, makes the Vue app mimic how a traditional web application would handle scrolling. If the user presses the back button, or you programmatically go back 1 page in history, the page will return to the point where it was previously, not the top of the page.

To specify a link to a route, we use the router-link tag rather than a plain a tag. This tag takes a :to parameter, which is an object with a name property; if it requires parameters/properties, a params property is included. mpj:Navigation.vue is littered with the former; see the showEdit method in mpj:RequestCard.vue for the structure on the latter (and also an example of programmatic navigation vs. router-link).

Components

When software developers hear “components,” they generally think of reusable pieces of software that can be pulled together to make a system. While that isn't wrong, it's important to understand that “reusable” does not necessarily mean “reused.” For example, the privacy policy (mpj:PrivacyPolicy.vue) is a component, but reusing it throughout the application would be… well, let's just say a “sub-optimal” user experience.

However, that does not mean that none of our components will be reused. RequestCard, which we referenced above, is used in a loop in the Journal component (mpj:Journal.vue); it is reused for every request in the journal. In fact, it is reused even for requests that should not be shown; behavior associated with the shouldDisplay property makes the component display nothing if a request is snoozed or is in a recurrence period. Instead of the journal being responsible for answering the question "Should I display this request?", the request display answers the question "Should I render anything?". This may seem different from typical server-side page generation logic, but it will make more sense once we discuss state management (next post).

Looking at some other reusable (and reused) components, the page title component (mpj:PageTitle.vue) changes the title on the HTML document, and optionally also displays a title at the top of the page. The “date from now” component (mpj:DateFromNow.vue) is the most frequently reused component. Every time it is called, it generates a relative date, with the actual date/time as a tool tip; it also sets a timeout to update this every 10 seconds. This keeps the relative time in sync, even if the router destination stays active for a long time.

Finally, it's also worth mentioning that SFCs do not have to have all three sections defined. Thanks to conventions, and depending on your intended use, none of the sections are required. The “date from now” component only has a script section, while the privacy policy component only has a template section.

Component Interaction

Before we dive into the specifics of events, let's look again at Journal and RequestCard. In the current structure, RequestCard will always have Journal as a parent, and Journal will always have App as its parent. This means that RequestCard could, technically, get its toast implementation via this.$parent.$parent.toast; however, this type of coupling is very fragile2. Requiring toast as a parameter to RequestCard means that, wherever RequestCard is implemented, if it's given a toast parameter, it can display toasts for the actions that would occur on that request. Journal, as a direct descendant from App, can get its reference to the toast instance from its parent, then pass it along to child components; this only gives us one layer of dependency.

In Vue, generally speaking, parent components communicate with child components via props (which we see with passing the toast instance to RequestCard); child components communicate with parents via events. The names of events are not prescribed; the developer comes up with them, and they can be as terse or descriptive as desired. Events can optionally have additional data that goes with it. The Vue instance supports subscribing to event notifications, as well as emitting events. We can also create a separate Vue instance to use as an event bus if we like. myPrayerJournal uses both of these techniques in different places.

As an example of the first, let's look at the interaction between ActiveRequests (mpj:ActiveRequests.vue) and RequestListItem (mpj:RequestListItem.vue). On lines 41 and 42 of ActiveRequests (the parent), it subscribes to the requestUnsnoozed and requestNowShown events. Both these events trigger the page to refresh its underlying data from the journal. RequestListItem, lines 67 and 79, both use this.$parent.$emit to fire off these events. This model allows the child to emit events at will, and if the parent does not subscribe, there are no errors. For example, AnswerdRequests (mpj:AnsweredRequests.vue) does not subscribe to either of these events. (RequestListItem will not show the buttons that cause those events to be emitted, but even if it did, emitting the event would not cause an error.)

An example of the second technique, a dedicated parent/child event bus, can be seen back in Journal and RequestCard. Adding notes and snoozing requests are modal windows3. Rather than specifying an instance of these per request, which could grow rather quickly, Journal only instantiates one instance of each modal (lines 19-22). It also creates the dedicated Vue instance (line 46), and passes it to the modal windows and each RequestCard instance (lines 15, 20, and 22). Via this event bus, any RequestCard instance can trigger the notes or snooze modals to be shown. Look through NotesEdit (mpj:NotesEdit.vue) to see how the child listens for the event, and also how it resets its state (the closeDialog() method) so it will be fresh for the next request.

 

That wraps up our tour of Vue routes and components; next time, we'll take a look at Vuex, and how it helps us maintain state in the browser.


1 That's my summary; I'm sure they've got much more eloquent ways to describe it.

2 ...and kinda ugly, but maybe that's just me.

3 Up until nearly the end of development, editing requests was a modal as well. Adding recurrence made it too busy, so it got to be its own page.

Categorized under , ,
Tagged , , , , , , , , , , , ,

Sunday, November 25, 2007
  Adding Tags to a WordPress Theme

WordPress 2.3 introduced tags, but unless you're using the default theme, your theme (like mine) probably didn't support them. Nowhere did I find a good example of how to add tags to your theme. Then, I was playing around with the theme switcher on my personal blog, and discovered that the default theme had tag support. I looked at it, and it was amazingly simple.

There is a new template tag called ...drumroll… the_tags. It takes three parameters: how to begin the list, how to separate each tag, and how to end the list. The tag does not do any output if a post hasn't been tagged, so it can safely sit in your theme until you need it to be active.

Here's how I did it in my personal blog.

<?php the_tags('<div class="tags">Tags » ', ' • ', '</div>'); ?>

Of course, you could also do it using an unordered list…

<?php the_tags('Tags<ul class="tags"><li>', '</li><li>', '</li></ul>'); ?>

Drop some styling for the “tags” class in your theme's CSS, and you're good to go!

(Well, not quite. You'll want to make sure to make the same change in your main index template, single post template, and archive template, so that the tags appear no matter how the user got to the post.)

Categorized under
Tagged , , ,